Cerio FPOE-MPD80 PoE Splitter, 5 Gig Ethernet, 802.3bt PoE++
This 1 Gigabit Ethernet / 5 Gigabit Ethernet PoE++ Splitter allows a non-PoE device to upgrade to PoE, it is used to deploy remote non-PoE device with no nearby AC outlets.
It takes in PoE 50-57V Ethernet power + data input and separates out DC Power up to 80Watt and only Ethernet Data output.
And DC output voltage is switchable to 12V or 19V and 24V.
It also supports Electro Static Discharge (ESD) protection, including Over Voltage protection and Short Circuit Protection ensuring device safety.
Standards & Hardware Specifications |
|
Standard |
IEEE802.3 10BASE-T |
Network Media |
100BASE-TX: UTP Cat.5 or up |
Data Transfer Rate |
100M/1G/2.5G/5G (Half-duplex), 200M/2G/5G/10G (Full-duplex) |
Data PIN |
PIN 1/2, 3/6 & 4/5, 7/8 |
Power PIN |
End-span (Type-A): PIN 1/2,3/6 ; Mid-span (Type-B): PIN 4/5,7/8 |
Data in |
Connects PC/HUB/Switch |
Ethernet Connector |
RJ-45 x1 for Power + Data input |
ESD Protection |
Over Voltage protection and Short Circuit Protection |
Environmental & Mechanical Characteristics |
|
Max Power Output |
80Watt (DC 24V Output) |
Power Interface(output) |
DC-Jack |
Power Requirement |
50V~57V PoE Power Source |
POE Input Voltage |
50V~57V |
DC Output Control Range |
12V/19V/24V three range adjustable by DIP switch |
DC Output Current |
24V/3.33A , 19V/3.94A, 12V/4.17A |
Cable and Current-Resistance Loss |
DC 24V @ 100Meter : 12.50% with Cat.6 Cable |
LED Indicators |
Voltage Output LED x3 : 12V or 19V or 24V |
Operating Temperature |
0° to 55° C |
Storage Temperature |
-40° to 70° C |
Operating Humidity |
10% to 90% non-condensing |
Storage Humidity |
5% to 90% non-condensing |
Dimension ( W x H x D ) |
84.5 x 80 x 39.5mm |
Weight ( g ) |
96g |
Case of material |
ABS |
Certifications |
FCC ,CE, RoHs compatible |
Package Contents |
|
FPOE-MPD80 Main Unit |
x1 |
Inside diameter 2.1(PHY)mm DC to DC Cable |
x1 |
Quick Installation Guide |
x1 |
Warranty Card |
x1 |