PoE Texas GPOES-8-7AB 8-Port Gigabit Passive PoE Switch, 7 PoE Ports and 1 Uplink
8-Port Passive PoE Switch (no power supply)
- Power 24 or 48 volt PoE devices depending on power source used
- Can be powered via another PoE switch, PoE Injector, 24V power supply or 48V power supply
- Can act as a PoE repeater
This switch from PoE Texas offers passive PoE for Ubiquiti and Mikrotik devices, among others.
Instantly add Passive PoE to your LAN (Add a 48v or 24v power supply depending on the devices you need to power).
- 8 port switch with 7 passive PoE ports
- 10/100/1000 Gigabit Ethernet capability
- Use to power 24 or 48 volt PoE devices
- Unamanaged for easy install with VLAN transparancy
- Passive "Always On" Power over Ethernet for versatility
- Can be powered via another PoE switch or PoE injector on the uplink port
- PoE repeater - Daisy-chain in series to extend Gigabit data up to 200m
Instantly add Passive PoE to your LAN
48v or 24v power supply required
7 PoE ports allow you to power multiple devices
Offers passive PoE mode B via dip switch for Ubiquiti and Mikrotik devices
Add 7 ports of PoE to your network. Run a single Ethernet cable up to 100 meters from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. Or run two GPOES-8-7AB switches in a series to extend your data reach to more than 200m.
Passive PoE means versatility. A Passive PoE injector always delivers the same voltage as its power source.
Choose PoE mode A or B. For 24V passive it should be set to mode B via dip switch.
Plug and Play - Unmanaged PoE switch with transparent VLAN throughput
Delivers passive "always on" power to the end device
Select Mode A, Mode B or Data only per port for compatibility options
Data + PoE Ports : 7
Data only Ports : 1
Data Rate : Gigabit
Dimensions : 19.05 x 8.255 x 3.175 cm
Operating Humidity : 5% to 90%
Operating Temperature Range : -10 - 60C
Output Voltage : 24 Volts
PoE Method : Passive
PoE Mode/Pinout : Mode A (-1,2 +3,6) / Mode B (+4,5 -7,8)
Power Input : 2.1 x 5.5 mm DC or PoE on uplink port