Powershield PSCE1000 Centurion Tower 1000VA/ 900W Double Conversion True Online UPS
Centurion Tower 1000VA/ 900W Double Conversion True Online UPS. 2x NZ Outlets + 2x IEC Outlets. EBM Compatible for Extended Runtime, Programmable Power Outlets.
The Centurion is designed to protect the critical computer, communications, industrial, medical and other mission critical equipment. A true online double conversion UPS, the Centurion is designed to guarantee trouble-free operation of protected equipment in any harsh electrical environment. Versatile management and hardware options offer the flexibility to build up a power protection solution to fit any application. This range now comes with two sets of sockets on the back, one row of output sockets are programmable meaning that you can shed less important loads. This will leave additional valuable backup time to the equipment that is most critical. This UPS includes a stylish, informative LCD display.
- True Online Double Conversion
- Wide input voltage range (110-300 VAC)
- Input power factor correction 0.98
- 50Hz/ 60Hz frequency converter mode
- Programmable power outlets
- Emergency power off function (EPO)
- Optional Eco-mode operation for energy saving
- Generator compatible
- Backup time for all models is easily extended by simply plugging additional battery banks
- Charger capacity expansion to 9A for long-run models
- USB, RS232, SNMP and AS400 multiple communications available
- External maintenance bypass available for all models
- N + X parallel redundancy available for 6K/ 10K models
- Monitoring and Shutdown Software included
|
INPUT |
||
|
Voltage Range |
Low Line Transfer |
160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5% |
|
Low Line Comeback |
175 VAC ± 5% |
|
|
High Line Transfer |
300 VAC ± 5% |
|
|
High Line Comeback |
47.5Hz ~ 52.5Hz or 57Hz ~ 63Hz |
|
|
Frequency Range |
47.5Hz ~ 52.5Hz or 57Hz ~ 63Hz |
|
|
Phase |
Single phase with ground |
|
|
Power Factor |
0.98 |
|
|
OUTPUT |
||
|
AC Voltage Regulation (Batt. Mode) |
± 3% |
|
|
Frequency Range (Synchronized Range |
48Hz ~ 52Hz or 57Hz ~ 63Hz |
|
|
Frequency Range (Batt. Mode) |
50Hz ± 0.25Hz or 60Hz ± 0.3Hz |
|
|
Load Crest Factor |
3:1 |
|
|
Harmonice Distortion |
3% THD (Linear Load) 6% THD (Non-linear Load) |
|
|
Transfer |
AC Mode to Batt. Mode |
Zero |
|
Inverter to Bypass |
4ms (Typical) |
|
|
Waveform (Batt. Mode) |
Pure Sinewave |
|
|
EFFICIENCY |
||
|
ECO Mode |
85% |
|
|
Battery Mode |
83% |
|
|
BATTERY |
||
|
Battery Type |
12Vx9AH(x3) |
|
|
Typical Recharge Time |
4 Hours to Recover to 90% Capacity |
|
|
Charging Time (Max.) |
1.0A |
|
|
Charging Voltage |
41.0 VDC ± 1% |
|
|
PROTECTION |
||
|
Full Protection |
Overload, discharge, thermal, short circuit, and overcharge protection |
|
|
COMMUNICATIONS & MANAGEMENT |
||
|
Interface |
USB or RS232 as standard, Intelligent slot for PSSNMP |
|
|
Software |
Power Shield NetGuard Software - supports Windows based operating Systems, Linux, Unix & Mac |
|
|
LCD Display / Alarm |
UPS Status, Load Level, Battery Level, Input/Output Voltage, |
|
|
Audible Alarm |
Battery Mode, Low Battery, Overload, Fault |
|
|
PHYSICAL |
||
|
Dimenesion (D x W x H) |
396 x 145 x 240mm |
|
|
Weight |
14kg |
|
|
OPERATING ENVIRONMENT |
||
|
Temperature |
0°C - 40°C |
|
|
Humidity |
20-90% (RH Non-condensing) |
|
|
Noise Level |
Less than 45dBA @ 1 Meter |
|
|
COMPLIANCE |
||
|
Safety |
EN62040-1-1 2003, IEC60950-1-1 |
|
|
EMS |
EN62040-2 2006 |
|
|
RoHS |
Directive 2001 / 65 / EU |
|
|
INPUT |
||
|
Voltage Range |
Low Line Transfer |
160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5% |
|
Low Line Comeback |
175 VAC ± 5% |
|
|
High Line Transfer |
300 VAC ± 5% |
|
|
High Line Comeback |
47.5Hz ~ 52.5Hz or 57Hz ~ 63Hz |
|
|
Frequency Range |
47.5Hz ~ 52.5Hz or 57Hz ~ 63Hz |
|
|
Phase |
Single phase with ground |
|
|
Power Factor |
0.98 |
|
|
OUTPUT |
||
|
AC Voltage Regulation (Batt. Mode) |
± 3% |
|
|
Frequency Range (Synchronized Range |
48Hz ~ 52Hz or 57Hz ~ 63Hz |
|
|
Frequency Range (Batt. Mode) |
50Hz ± 0.25Hz or 60Hz ± 0.3Hz |
|
|
Load Crest Factor |
3:1 |
|
|
Harmonice Distortion |
3% THD (Linear Load) 6% THD (Non-linear Load) |
|
|
Transfer |
AC Mode to Batt. Mode |
Zero |
|
Inverter to Bypass |
4ms (Typical) |
|
|
Waveform (Batt. Mode) |
Pure Sinewave |
|
|
EFFICIENCY |
||
|
ECO Mode |
85% |
|
|
Battery Mode |
83% |
|
|
BATTERY |
||
|
Battery Type |
12Vx9AH(x3) |
|
|
Typical Recharge Time |
4 Hours to Recover to 90% Capacity |
|
|
Charging Time (Max.) |
1.0A |
|
|
Charging Voltage |
41.0 VDC ± 1% |
|
|
PROTECTION |
||
|
Full Protection |
Overload, discharge, thermal, short circuit, and overcharge protection |
|
|
COMMUNICATIONS & MANAGEMENT |
||
|
Interface |
USB or RS232 as standard, Intelligent slot for PSSNMP |
|
|
Software |
Power Shield NetGuard Software - supports Windows based operating Systems, Linux, Unix & Mac |
|
|
LCD Display / Alarm |
UPS Status, Load Level, Battery Level, Input/Output Voltage, |
|
|
Audible Alarm |
Battery Mode, Low Battery, Overload, Fault |
|
|
PHYSICAL |
||
|
Dimenesion (D x W x H) |
396 x 145 x 240mm |
|
|
Weight |
14kg |
|
|
OPERATING ENVIRONMENT |
||
|
Temperature |
0°C - 40°C |
|
|
Humidity |
20-90% (RH Non-condensing) |
|
|
Noise Level |
Less than 45dBA @ 1 Meter |
|
|
COMPLIANCE |
||
|
Safety |
EN62040-1-1 2003, IEC60950-1-1 |
|
|
EMS |
EN62040-2 2006 |
|
|
RoHS |
Directive 2001 / 65 / EU |
|
